Perspectives for licensing vaccines in Mexico.

Vaccine products represent one of the most successful public health measure to this day. This has been reflected during the current COVID-19 pandemic where more than 4.87 billion people have received at least one vaccine dose. In Latin America, Mexico occupies the second position in terms of the number of vaccinated people with 83.97 million people receiving at least a single dose. As in other countries, regulatory approval in Mexico is one of the key aspects that influences the public access to vaccines. This creates an active interplay between regulatory authorities establishing a regulatory framework to assure the quality, safety and efficacy of the vaccines, and applicants fulfilling this information. Mexico is a member of the International Council for Harmonisation (ICH) and it has adopted the Common Technical Document (CTD) for providing this information. This is particularly useful for vaccines developed abroad where it is expected to speed the evaluation of the new product. The Secretariat of Health of Mexico (SALUD) has published guidelines and laws or regulations related to GMP, labeling, stability, clinical trials, biocomparability and pharmacovigilance for drug products including vaccines which are classified as biological products. SALUD has also established guidelines and international homologating agreements to facilitate the application process for vaccine approval. Nevertheless, technical and scientific information and administrative processes for vaccine approval might be relatively concealed. Therefore, we aim to enable researchers and manufacturers in Mexico and overseas to better understand these requirements. To our knowledge, this is the most up-to-date and comprehensive attempt to present this information, also including information for COVID-19 vaccines. Here we describe the current requirements and processes by COFEPRIS, the national regulatory agency, for vaccine licensing and for emergency use authorization for COVID-19 vaccines in Mexico.

Mono-PEGylated lysozyme purification with increased productivity and isomer differentiation through heparin monolith chromatography.

PEGylated protein purification with the required quality attributes has represented a bioengineering challenge and Affinity Monolith Chromatography (AMC) has never been exploited for this goal. This work reports the generation of a heparin-modified affinity monolith disk by reductive alkylation with raised ligand density for its use as chromatographic support in the separation of lysozyme PEGylation reactions (LPRs) with three different PEG sizes (1, 20 and 40 kDa). For immobilized heparin determination a modified toluidine colorimetric assay adapted to microplate format was proposed. The heparin modified-disk was able to differentiate positional isomers of 20 kDa mono-PEGylated lysozyme at neutral pH using a salt linear gradient. Identity of PEG-conjugates was verified by SDS-PAGE and positional isomers were partially characterized by peptide mapping mass spectrometry. 20 kDa mono-PEGylated lysozyme conjugate purity (99.69 ± 0.05%) was comparable with traditional chromatographic methods while productivity (0.0964 ± 0.0001 mg/mL*min) was increased up to 6.1 times compared to that obtained in heparin packed-bed affinity chromatography procedures. The proposed AMC method represents a reliable, efficient, easy-handling, fast and single-step operation for the analysis or preparative isolation of PEGylated proteins containing a heparin binding domain.

Bioassays for the Evaluation of Target Neutralization and Complement-Dependent Cytotoxicity (CDC) of Therapeutic Antibodies.

Therapeutic monoclonal antibodies (mAbs) are complex bioengineered proteins that require to be routinely characterized with robust and reliable bioassays. Infliximab was the first anti-TNFα mAb approved for use in humans and its use has revolutionized the treatment TNF-mediated inflammatory disorders. The mechanism of action (MOA) of infliximab involves its binding to soluble (s) and membrane (m) TNFα. Here, we describe two simple in vitro bioassays for the assessment of key activities of infliximab. First, a bioassay for TNFα neutralization, which evaluates the Fab binding to sTNFα and the consequent reduction in the activation of TNFα receptors and TNFα-induced expression of adhesion molecules on endothelial cells. A second bioassay evaluates the triggering of Complement-Dependent Cytotoxicity (CDC) in cells expressing mTNFα, which requires the interaction of infliximab-Fc with proteins of the complement system. In both cases, the biological responses are measured by flow cytometry, which is accessible for most laboratories. The methods reported here can be easily adapted to other therapeutic mAbs with similar MOA.

Consistency of a dialyzable leucocyte extract manufactured at GMP facilities by nuclear magnetic resonance spectroscopy.

The present work describes the development and validation of a first report including several non-invasive NMR schemes to identify parameters as local chemical environments, homo- and heteronuclear site-specific spin correlations, diffusion coefficient-dependent polydispersity indexes and quantification of identified peptide entities that composes a commercial human Dialyzable Leucocyte Extract (DLE), Transferon, an oral liquid formulation of low-molecular-weight peptides. The above parameters were useful indicators to verify reproducibility, consistency and homogeneity among the DLE batches manufactured at Good Manufacturing Practice (GMP) facilities and for batch-releasing purposes in a quality control laboratory. The results showed that peptide identity of the DLE is represented with both high reproducible one-dimensional proton spectra and diffusion coefficient distributions that predicts in turn a weight-average molecular weight of around 6.7-7.4 kDa and a mean polydispersity index of 1.13. The obtained NMR peptide fingerprint of the analyzed DLE allowed to i) confirm its structural homogeneity by line-shape analysis, ii) identify and quantify its peptide content within the total solution with qNMR methods iii) to confirm the robustness of the technique as a feasible alternative for routine analysis of Natural or non-Natural Complex Drugs, such as DLEs.

Quality attributes of partially hydrolyzed collagen in a liquid formulation used for skin care.

BACKGROUND: The deterioration of the skin accentuates over time, affecting its aesthetic appearance. This is characterized by the weakening of the mechanisms involved in the regeneration and repair of the dermal matrix. Consequently, the skin losses elasticity and smoothness resulting in the formation of wrinkles. The alternatives for facial rejuvenation include surgery, injection of botulinum toxin, and the application of masks. Topic products are less invasive, can be self-applied, and have an increased benefit/risk relationship. AIM: We developed a liquid formulation containing collagen hydrolyzed and evaluated the product by cutting-edge technology in order to define proper its quality attributes. METHODS: We employed nuclear magnetic resonance (NMR), size-exclusion chromatography (SEC), and mass spectrometry (MS). Additionally, we analyzed its cosmetical effect in five volunteers and we demonstrate the product safety. RESULTS: Our results demonstrate the following: (a) a stable secondary structure identity associated to the known triple helix arrangement in liquid and solid states; (b) a typical conformational flexibility depending on its hydration state; (c) thermal stability confirmed by liquid- and solid-state nuclear magnetic resonance schemes; and (d) a molecular mass distribution of peptides between 0.5 and 19.5 kDa. The product faded wrinkles in the forehead, an effect that remained after removing the mask. The formula was non-irritating and hypoallergenic. CONCLUSION: We characterized, using state-of-the-art methodologies, the quality attributes that are critical for the safety and beneficial effect of a new collagen-containing formula.

Sequencing Analysis and Identification of the Primary Peptide Component of the Dialyzable Leukocyte Extract "Transferon Oral": The Starting Point to Understand Its Mechanism of Action.

"Transferon Oral" is a peptide-derived product with immunomodulatory properties obtained from the lysis and dialysis of human buffy coat. Its active pharmaceutical ingredient, generically known as Dialyzable Leucocyte Extract, is a mixture of peptide populations with reproducible proportions among batches. "Transferon Oral" modulates IFN-γ, TNF-α, and IL-6 and increases the survival rate in a herpes infection murine model when oropharyngeally (ORO) administered, which correlate with clinical observations where "Transferon Oral" is used as a therapeutic auxiliary in inflammatory diseases. Notwithstanding, how a peptide-derived product elicits systemic modulation of cytokines when ORO administered remains unclear. To shed light on the pharmacology of "Transferon Oral" its peptide components must be known. Ten "Transferon Oral" batches were sequenced by mass spectrometry and the intact peptides were identified. The most abundant peptides were the monomeric human Ubiquitin (Ub), a globular low-molecular mass protein, and an Ub variant which lacks the two-terminal Gly (Ub-GG). Recombinant Ub prevented murine death when ORO administered in a herpes infection murine model. Besides, the percentage of survival increased in groups treated with Transferon Oral+Ub and decreased in groups treated with Ub-depleted "Transferon Oral" respect to the group treated with "Transferon Oral" only. Our findings indicate that the biological properties of "Transferon Oral" are partially associated to the Ub content. They suggest that Ub may activate its extracellular receptor (CXCR-4) in the stomach eliciting systemic immunomodulatory effects via vagus nerve. This is the first report that identifies an active component of "Transferon Oral" with the potential for the development of oral peptide immunomodulators.

Serum levels of chemokines in adolescents with major depression treated with fluoxetine.

BACKGROUND: Major depressive disorder (MDD) is a global health issue that affects 350 million people of all ages. Although between 2% and 5.6% of affected individuals are adolescents, research on young patients is limited. The inflammatory response contributes to the onset of depression, and in adult MDD patients, symptom severity has been linked to chemokine levels. AIM: To determine the differences in circulatory levels of chemokines in healthy volunteers (HVs) and adolescents with MDD, and assess the changes induced by fluoxetine consume. METHODS: The 22 adolescents with MDD were monitored during the first 8 wk of clinical follow-up and clinical psychiatric evaluation was done using the Hamilton depresión rating scale (HDRS). The serum levels of monocyte chemoattractant protein-1 (MCP-1), macrophage inflammatory protein (MIP)-1α, MIP-1ß, interleukin (IL)-8, interferon gamma-induced protein (IP)-10, and eotaxin were measured in patients and HVs. RESULTS: In all cases, significant differences were detected in circulating chemokine levels between patients before treatment and HVs (P < 0.0001). All chemokines decreased at 4 wk, but only MCP-1 and IL-8 significantly differed (P < 0.05) between 0 wk and 4 wk. In the patients, all chemokines rose to their initial concentrations by 8 wk vs 0 wk, but only IP-10 did so significantly (P < 0.05). All patients experienced a significant decrease in HDRS scores at 4 wk (P < 0.0001) and 8 wk (P < 0.0001) compared with 0 wk. CONCLUSION: Despite the consumption of fluoxetine, patients had significantly higher chemokine levels, even after considering the improvement in HDRS score. The high levels of eotaxin, IP-10, and IL-8 partially explain certain aspects that are affected in MDD such as cognition, memory, and learning.

Antibody-drug conjugates: the new generation of biotechnological therapies against cancer.

Therapeutic antibodies are recombinant proteins used in the treatment of cancer. There is a new generation of monoclonal antibodies with activity against cancer cells, known as antibody-drug conjugates. These molecules are made up of three elements: a monoclonal antibody, a highly potent cytotoxic drug, and a chemical linker that binds them together. The antibody recognizes tumor antigens, thereby allowing targeted delivery of the cytotoxic agent to cancer cells. After recognizing its antigen, the antibody-drug conjugate is endocytosed by the target cells, where the protein fraction is degraded into lysosomes, releasing the cytotoxic drug. This article reviews antibody-drug conjugates general characteristics and describes the clinical evidence of efficacy and safety of the first four approved by regulatory agencies in the United States and Europe.

Los anticuerpos terapéuticos son proteínas recombinantes empleadas en el tratamiento del cáncer. Existe una nueva ­generación de anticuerpos monoclonales con actividad contra las células cancerosas, conocidos como anticuerpos conjugados a fármacos. Estas moléculas están integradas por tres elementos: un anticuerpo monoclonal, un fármaco citotóxico con alta potencia y un enlazador químico que los une. El anticuerpo reconoce antígenos tumorales, por lo que permite la entrega dirigida del agente citotóxico hacia las células cancerosas. Tras el reconocimiento de su antígeno, el anticuerpo conjugado a fármaco es endocitado por las células blanco, donde se induce la degradación lisosomal de la fracción proteica y se libera el fármaco citotóxico. En el presente artículo se revisan las características generales de los anticuerpos conjugados a fármacos y se describe la evidencia clínica de la eficacia y seguridad de los primeros cuatro aprobados por las agencias reguladoras de Estados Unidos y Europa.

Anticuerpos conjugados a fármaco: la nueva generación de terapias biotecnológicas contra el cáncer / Antibody-drug conjugates: the new generation of biotechnological therapies against cancer

Resumen Los anticuerpos terapéuticos son proteínas recombinantes empleadas en el tratamiento del cáncer. Existe una nueva generación de anticuerpos monoclonales con actividad contra las células cancerosas, conocidos como anticuerpos conjugados a fármacos. Estas moléculas están integradas por tres elementos: un anticuerpo monoclonal, un fármaco citotóxico con alta potencia y un enlazador químico que los une. El anticuerpo reconoce antígenos tumorales, por lo que permite la entrega dirigida del agente citotóxico hacia las células cancerosas. Tras el reconocimiento de su antígeno, el anticuerpo conjugado a fármaco es endocitado por las células blanco, donde se induce la degradación lisosomal de la fracción proteica y se libera el fármaco citotóxico. En el presente artículo se revisan las características generales de los anticuerpos conjugados a fármacos y se describe la evidencia clínica de la eficacia y seguridad de los primeros cuatro aprobados por las agencias reguladoras de Estados Unidos y Europa.

Abstract Therapeutic antibodies are recombinant proteins used in the treatment of cancer. There is a new generation of monoclonal antibodies with activity against cancer cells, known as antibody-drug conjugates. These molecules are made up of three elements: a monoclonal antibody, a highly potent cytotoxic drug, and a chemical linker that binds them together. The antibody recognizes tumor antigens, thereby allowing targeted delivery of the cytotoxic agent to cancer cells. After recognizing its antigen, the antibody-drug conjugate is endocytosed by the target cells, where the protein fraction is degradated into lysosomes, releasing the cytotoxic drug. This article reviews antibody-drug conjugates general characteristics and describes the clinical evidence of efficacy and safety of the first four approved by regulatory agencies in the United States and Europe.

Taking advantage of a high-throughput flow cytometer for the implementation of an ADCC assay for regulatory compliance.

Technological advances allowed the development of high-throughput instruments such as IntelliCyt iQue Screener PLUS®. Here, we took advantage of this technology to transfer a previously validated cytotoxicity assay. The evaluated parameters were cell permeability, caspase activation and phosphatidyl serine exposure. The assay was accurate (r2 = 0.90), precise (%CV ≤ 18.90) and specific. These results showed that this technology is suitable to be used in control quality environments. In addition, the automation provided a faster acquisition and analysis of data with precise and accurate results. This application could be implemented to evaluate another in vitro mechanism of action of different biotherapeutics.

Characterization of a Complex Mixture of Immunomodulator Peptides Obtained from Autologous Urine.

A complex mixture of peptides plays a key role in the regulation of the immune system; different sources as raw materials mainly from animals and vegetables have been reported to provide these extracts. The batch-to-batch product consistency depends on in-process controls established. However, when an immunomodulator is a customized product obtained from the same volunteer who will receive the product to personalize the treatment, the criteria to establish the consistency between volunteers are different. In this sense, it is expected to have the same molecular weight range although the profile of peptide abundance is different. Here, we characterized the peptide profile of three extracts of an immunomodulator obtained from the urine of different volunteers suffering from three different diseases (i.e., allergic rhinitis, rheumatoid arthritis, and chronic rhinopharyngitis), using size exclusion chromatography (SEC) and mass spectrometry (MS). The peptides contained in the immunomodulators were stable after six months, stored in a refrigerator. Our results showed a chromatographic profile with the same range of low molecular weight (less than 17 kDa) in all analyzed samples by SEC; these results were also confirmed by MS showing an exact mass spectrum from 3 to 13 kDa. The fact that the peptide profiles were conserved during a six-month period at refrigeration conditions (2 to 8°C) maintaining the quality and stability of the immunomodulator supports the notion that it might be an alternative in the treatment of chronic hypersensibility disorders.

Development and validation of a mass spectrometric method to determine the identity of rituximab based on its microheterogeneity profile.

Analytical methods have been considered the "eyes" for development, characterization and batch releasing of biotherapeutics over the past 40 years. One of the most powerful analytical platform for biotherapeutic analysis is mass spectrometry coupled to liquid chromatography (LC-MS). Due to its wide flexibility and instrumental configurations, LC-MS can determine different physicochemical attributes of proteins, e.g. molecular mass, primary sequence, and posttranslational modifications. Intact molecular mass analysis of therapeutic proteins is essential to confirm their identity. Analytical methods must be validated to support drug quality information during its approval process. Although there are international guidelines that provide general information on validation of analytical methods, practical examples about the design, selection of validation attributes and acceptance criteria of identity LC-MS methods are scarce. Here, according to the recommendations of Q2R1 ICH guideline, we showcase the validation of an LC-MS-TOF method to identity rituximab by determining its intact and deglycosylated molecular mass profiles. The proposed method specifically identified the m/z profile and deconvoluted mass profile of rituximab from deglycosylated rituximab and from excipient blank (specificity) with a maximum error of 76.63 ppm (accuracy) and a maximum Relative Standard Deviation (RSD) of 0.00315% (precision). Besides, the system suitability test, which was based on the expected mass value of the mass calibrator, confirmed the reliability of the analytical results. In summary, validation showed that the proposed method is suitable for identifying rituximab based on its glycosylated (intact) and deglycosylated mass profile.

Identity Profiling of Complex Mixtures of Peptide Products by Structural and Mass Mobility Orthogonal Analysis.

Identity is a critical quality attribute that must be determined before releasing batches of medicinal and dietary products. However, the identities of peptide-derived products composed of a large number of diverse molecules is challenging since most analytical techniques cannot analyze multiple molecules simultaneously. Here, we proposed the determination of the weight-average molecular weight (Mw) and polydispersity index (PDI) by mass spectrometry for control quality for the batch release of complex products, namely, glatiramer acetate (Copaxone), collagen hydrolysate (Colagenart), and a human dialyzable leucocyte extract (Transferon). The Mw and PDI values were orthogonally determined by PFG-STE-H2O(presaturation)-DOSY-NMR analysis. To the best of our knowledge, this is the first time that MS and NMR spectra have been combined to determine the PDI of complex products derived from protein hydrolysis that are not monodisperse. The performance of each method was evaluated by comparing the obtained results to those reported for glatiramer acetate using MALLS, the technique commonly employed to determine PDI. This combined approach demonstrates the ability of these techniques to separate peptide populations from complex mixtures to establish their identity through their mass distribution profiles.

Validation of a Cell Proliferation Assay to Assess the Potency of a Dialyzable Leukocyte Extract Intended for Batch Release.

Transferon® is a blood product with immunomodulatory properties constituted by a complex mixture of peptides obtained from a human dialyzable leukocyte extract (DLE). Due to its complex nature, it is necessary to demonstrate batch consistency in its biological activity. Potency is the quantitative measure of biological activity and is also a quality attribute of drugs. Here we developed and validated a proliferation assay using Jurkat cells exposed to azathioprine, which is intended to determine the potency of Transferon® according to international guidelines for pharmaceuticals. The assay showed a linear response (2.5 to 40 µg/mL), coefficients of variation from 0.7 to 13.6% demonstrated that the method is precise, while r2 = 0.97 between the nominal and measured values obtained from dilutional linearity showed that the method is accurate. We also demonstrated that the cell proliferation response was specific for Transferon® and was not induced by its vehicle nor by other peptide complex mixtures (glatiramer acetate or hydrolyzed collagen). The bioassay validated here was used to assess the relative potency of eight released batches of Transferon® with respect to a reference standard, showing consistent results. The collective information from the validation and the assessment of several batches indicate that the bioassay is suitable for the release of Transferon®.

A differential sex-specific pattern of IgG2 and IgG4 subclasses of anti-drug antibodies (ADAs) induced by glatiramer acetate in relapsing-remitting multiple sclerosis patients.

BACKGROUND: Glatiramer acetate (GA) is a drug for Multiple Sclerosis (MS) treatment. However, its administration induces anti-drug antibodies (ADA). This research evaluated the sex differences in humoral response against GA in RR-MS patients METHODS: We analyzed 69 RR-MS patients, 43 treated with GA and 26 treated with IFN-ß. In all cases, the serum concentration of IgG antibodies was determined by UPLC, whereas the levels of IgG subclasses (1-4) of anti-GA antibodies and the concentration of IL-6 were detected by Multiplex and IL-10, and IFN-γ were detected by ELISA. RESULTS: The total concentration of IgG antibodies in patients did not differ between treatments, whereas the IgG levels of ADA were higher in male and female patients treated with GA (P ≤ 0.0001). The subclasses of IgG anti-GA antibodies were as follows: IgG4>>IgG3>IgG1>IgG2. Statistical analysis showed differences in the IgG2 (P ≤ 0.01) and IgG4 (P ≤ 0.0001) subclasses by sex in RR-MS patients. Levels of IgG1 subclass in male patients correlated positively with the circulatory levels of IL-6 (rs = 0.587, P ≤ 0.04) and IFN-γ (rs = 0.721, P ≤ 0.001), while IgG2 subclass levels in female patients correlated with serum levels of IFN-γ (rs = 0.628, P ≤ 0.0006). Statistical analysis did not detect correlations between the levels of IgG (1-4) subclasses of anti-GA antibodies and the evaluated clinical parameters. CONCLUSION: This study showed differences in the levels of IgG2 and IgG4 subclasses of ADA between male and female RR-MS patients. Further studies are necessary to take advantage of the clinical potential of this finding.

Development of Functional Antibodies Directed to Human Dialyzable Leukocyte Extract (Transferon®).

Transferon® is an immunomodulator made of a complex mixture of peptides from human dialyzable leucocyte extracts (hDLEs). Development of surrogate antibodies directed to hDLE is an indispensable tool for studies during process control and preclinical trials. These antibodies are fundamental for different analytical approaches, such as identity test and drug quantitation, as well as to characterize its pharmacokinetic and mechanisms of action. A previous murine study showed the inability of the peptides of Transferon® to induce antibody production by themselves; therefore, in this work, two approaches were tested to increase its immunogenicity: chemical conjugation of the peptides of Transferon® to carrier proteins and the use of a rabbit model. Bioconjugates were generated with Keyhole Limpet Hemocyanin (KLH) or Bovine Serum Albumin (BSA) through maleimide-activated carrier proteins. BALB/c mice and New Zealand rabbits were immunized with Transferon® conjugated to KLH or nonconjugated Transferon®. Animals that were immunized with conjugated Transferon® showed significant production of antibodies as evinced by the recognition of Transferon®-BSA conjugate in ELISA assays. Moreover, rabbits showed higher antibody titers when compared with mice. Neither mouse nor rabbits developed antibodies when immunized with nonconjugated Transferon®. Interestingly, rabbit antibodies were able to partially block IL-2 production in Jurkat cells after costimulation with Transferon®. In conclusion, it is feasible to elicit specific and functional antibodies anti-hDLE with different potential uses during the life cycle of the product.

CD80 Expression Correlates with IL-6 Production in THP-1-Like Macrophages Costimulated with LPS and Dialyzable Leukocyte Extract (Transferon®).

Transferon® is a complex drug based on a mixture of low molecular weight peptides. This biotherapeutic is employed as a coadjuvant in clinical trials of several diseases, including viral infections and allergies. Given that macrophages play key roles in pathogen recognition, phagocytosis, processing, and antigen presentation, we evaluated the effect of Transferon® on phenotype and function of macrophage-like cells derived from THP-1 monocytes. We determined the surface expression of CD80 and CD86 by flow cytometry and IL-1ß, TNF-α, and IL-6 levels by ELISA. Transferon® alone did not alter the steady state of PMA-differentiated macrophage-like THP-1 cells. On the contrary, simultaneous stimulation of cells with Transferon® and LPS elicited a significant increase in CD80 (P ≤ 0.001) and CD86 (P ≤ 0.001) expression, as well as in IL-6 production (P ≤ 0.05) compared to the LPS control. CD80 expression and IL-6 production exhibited a positive correlation (r = 0.6, P ≤ 0.05) in cells exposed to Transferon® and LPS. Our results suggest that the administration of Transferon® induces the expression of costimulatory molecules and the secretion of cytokines in LPS-activated macrophages. Further studies are necessary to determine the implication of these findings in the therapeutic properties of Transferon®.

Validation of a cell-based colorimetric reporter gene assay for the evaluation of Type I Interferons.

The biotherapeutic type I interferons (IFN-I) are indicated to treat several diseases. These products are regulated to guarantee safety and efficacy through critical quality attributes. For this purpose, the development of robust assays is required, followed by its validation to demonstrate their suitability for its intended purpose. Despite there are some commercial kits to evaluate IFN-I signaling, these are focused on measuring in vitro biological response instead of their validation, which is a pharmaceutical industry requirement. The aim of this work was to validate the HEK-Blue IFN-α/ß system evaluating the biological activity of IFN-α/ß under good laboratory practices, according to international standards. Our results demonstrated that HEK-Blue IFN-α/ß system comply with accuracy (r2>0.95) precision (CV < 20%) and specificity for both IFN-α/ß; confirming that this assay is robust for this biotherapeutics' evaluation. Thereby, this bioassay could be implemented as a complementary method to the classical anti-proliferative and anti-viral assays under quality control environments.

Determination of Peptide Profile Consistency and Safety of Collagen Hydrolysates as Quality Attributes.

Collagen hydrolysates are dietary supplements used for nutritional and medical purposes. They are complex mixtures of low-molecular-weight peptides obtained from the enzymatic hydrolysis of collagen, which provide intrinsic batch-to-batch heterogeneity. In consequence, the quality of these products, which is related to the reproducibility of their mass distribution pattern, should be addressed. Here, we propose an analytical approach to determine the peptide pattern as a quality attribute of Colagenart®, a product containing collagen hydrolysate. In addition, we evaluated the safety by measuring the viability of two cell lines exposed to the product. The consistency of peptide distribution was determined using Size Exclusion Chromatography (SEC), Mass Spectrometry coupled to a reversed phase UPLC system (MS-RP-UPLC), and Shaped-pulse off-resonance water-presaturation proton nuclear magnetic resonance spectrometry [1 Hwater_presat NMR]. The mass distribution pattern determined by SEC was in a range from 1.35 to 17 kDa, and from 2 to 14 kDa by MS-RP-UPLC. [1 Hwater_presat NMR] showed the detailed spin-systems of the collagen hydrolysates components by global assignment of backbone Hα and NH, as well as side-chain proton resonances. Additionally, short-range intraresidue connectivity pathways of identified spin-regions were obtained by a 2D homonuclear shift correlation Shaped-pulse solvent suppression COSY scheme. Safety analysis of Colagenart® was evaluated in CaCo-2 and HepG2 cells at 2.5 and 25 µg/mL and no negative effects were observed. The results demonstrated batch-to-batch reproducibility, which evinces the utility of this approach to establish the consistency of the quality attributes of collagen hydrolysates. PRACTICAL APPLICATION: We propose state-of-the art analytical methodologies (SEC, MS, and NMR) to evaluate peptide profile and composition of collagen hydrolysates as quality attributes. These methodologies are suitable to be implemented for quality control purposes.

Validation of an ADCC assay using human primary natural killer cells to evaluate biotherapeutic products bearing an Fc region.

The development of biotherapeutics requires continuous improvement in analytical methodologies for the assessment of their quality attributes. A subset of biotherapeutics is designed to interact with specific antigens that are exposed on the membranes of target cells or circulating in a soluble form, and effector functions are achieved via recognition of their Fc region by effector cells that induce mechanisms such as antibody-dependent cell-mediated cytotoxicity (ADCC). Thus, ADCC induction is a critical quality attribute (CQA) that must be evaluated to ensure biotherapeutic efficacy. Induction of ADCC can be evaluated by employing effector cells from different sources, such as peripheral blood mononuclear cells (PBMC) and genetically modified cell lines (e.g., transfected NKs or Jurkat cells), and different approaches can be used for detection and results interpretation depending on the type of effector cells used. In this regard, validation of the assays is relevant to ensure the reliability of the results according to the intended purpose. Herein, we show the standardization and validation of ADCC assays to test the potency of three biotherapeutic proteins using primary NK cells obtained from fresh blood as effector cells and detecting cell death by flow cytometry. The advantage of using primary NKs instead of modified cells is that the response is closer to that occurring in vivo since cytotoxicity is evaluated in a direct manner. Our results indicate that in all cases, the assays exhibited a characteristic sigmoidal dose/response curve complying with accurate, precise and specific parameters. Thereby, the validated ADCC assay is an appropriate alternative to evaluate the biological activities of these type of biotherapeutics.